Tel: +86-372-3175078
E-mail: aydwyj@dwyjgs.com

Contact
ATTN: Li Xin
E-MAIL: aydwyj@dwyjgs.com
TEL: +86-372-3175078
Address: West Of Mengjia Village Road, Longqu Road, Long'an District, Anyang City, Henan Province

The Silicon Manganese Lumps To Stray Linear Vibrating Screen

             By using the principle of the double vibrating motor, the material is thrown forward as a linear motion on the sieve surface, which is suitable for the sieving of 0.074-5mm any dry material. The maximum feed size is less than 10mm. Vibrating screen (linear sieve) is a new type of high-performance screening equipment, widely used in mining, coal, smelting, building materials, refractories, light industry, chemical industry and other industries. Linear vibrating screen (linear sieve) stable and reliable, less consumption, low noise, long life, vibration type stability, high screening efficiency advantages. The wind-selectable linear vibrating screen adds a ventilation device on the basis of the original linear sieve. For powder, granular materials screening, impurity and grading, widely used in plastics, abrasives, chemicals, pharmaceuticals, building materials, grain, carbon, fertilizers and other industries.Silicon Manganese Lumps

             Linear Vibrating Screen Installation requirements: 1. First, the screen machine bracket flat support, motor screws must be tight: 2. Sieve frame must be parallel pressure, 800CM wide above the screen must be added to the horizontal layering: 3. The layering must be pressed to prevent the sieve frame from dangling to the screen: 4. The screen is tightened and fastened with the 19th shoe nail Net: 5. The pressure net layering front extends 3 points in case of serial number: 6. The Sieve machine if does not forward the material Exchange one motor thread, vibrates the motor correct rotation direction, should be simultaneously outward or outward.Silicon Manganese Lumps

             The structure of the linear vibrating screen is explained: The Sieve machine mainly consists of sieve box, sieve frame, sieve, vibrating motor, motor pedestal, damping spring and bracket. 1, Sieve box: From the number of different thickness of the steel plate welding system, with a certain strength and stiffness, is the main component of the screen. 2, screen frame: made of pine or small deformation of wood, mainly used to maintain screen formation, to achieve normal screening. 3, screen: Low carbon steel, brass, stainless steel wire and other tree screen. 4, vibration motor to be used for maintenance methods refer to the vibration motor manual. 5, Motor pedestal: The installation of motor, before use must check whether the screw fastening. 6, damping Spring: To prevent vibration to the ground while supporting the full weight of the Sieve box, the installation of the spring must be perpendicular to the ground.Silicon Manganese Lumps